| 1. | There is almost no voltage drop in this bus bar.
|
| 2. | The autotransformer is connected to the bus bars by an additional circuit breaker.
|
| 3. | Bus bars must make ohmic contact.
|
| 4. | EGA also produces anode bars and bus bars, used in the electrolytic aluminium production process.
|
| 5. | The incoming bare stranded ground wire can be seen near the bottom of the neutral bus bar.
|
| 6. | This bus bar is similar to the electrified or " third " rail of a subway train.
|
| 7. | The current to be measured is passed through the two cores, possibly by a solid bus bar.
|
| 8. | The 21st orbit saw a short-circuit occur in the bus bar serving the 250 volt main inverter.
|
| 9. | Fuseholders may be secured by screws to a panel, attached to bus bars, or mounted on DIN rails.
|
| 10. | The power supply bus bars on the machine spanned distances greater than three feet, and were octopus-like in design.
|
मोबाइल